IEC B14 Face Mounted Stainless Steel Motor -TENV
Face Mounted Stainless Steel Motor
Power-trans’s food safety Face Mounted stainless steel motors for food and beverage plants can withstand high-pressure cleaning, easily maintain hygienic standards, and reduce downtime.
Designed for industries that need high hygiene, such as meat, poultry, fish, dairy products, beverages, and places where high food safety is critical.
IEC B14 Face Mounted Stainless Steel Motor -TENV
Description Of Stainless Steel Motor
|
 |
| Frame Type | Flange type | Poles | D | E | F | G | M | N | P | R | S | T | Flange Hole | Shaft Hole | AC | AD |
| 63 | FT75 | 2,4 | 11 | 23 | 4 | 8.5 | 75 | 60 | 90 | 0 | M5 | 2.5 | 4 | M4 | 114 | 117 |
| 71 | FT85 | 2.4.6 | 14 | 30 | 5 | 11 | 85 | 70 | 105 | 0 | M6 | 2.5 | 4 | M5 | 134 | 129 |
| 80 | FT100 | 2.4.6 | 19 | 40 | 6 | 155 | 100 | 80 | 120 | 0 | M6 | 3 | 4 | M6 | 144 | 135 |
| 90S | FT115 | 2.4.6 | 24 | 50 | 8 | 20 | 115 | 95 | 140 | 0 | M8 | 3 | 4 | M8 | 164 | 147 |
Specifications of B14 Face Mounted Motor
| Frame | KW | Mounting | IP |
| 63 | 0.18 | B3, B5, B14, B34, B35 | IP55 |
| 71 | 0.25， 0.37 | ||
| 80 | 0.55， 0.75 | ||
| 90 | 1.1， 1.5 | ||
| 100 | 2.2， 3.0 | ||
| 112 | 4.0 | ||
| 1332 | 5.5， 7.5 |
It is also available if you have any special requirements for the motor.
Features of Face Mounted stainless steel motors
B14 Face Mounted Motor,Our food safety Face Mounted stainless steel motors for food and beverage plants can withstand high-pressure cleaning, easily maintain hygienic standards, and reduce downtime.
Designed for industries that need high hygiene, such as meat, poultry, fish, dairy products, beverages, and places where high food safety is critical.
features:
|
 |
Drain holes –Easily removable for thorough drainage in any mounting position
Windings engineered for durability – Epoxy-encapsulated system prevents any water and moisture from reaching the windings and seals the lead entrance to the terminal box. High tec seal systems for IP69 protection.
Food grade lubricant – Lubricants suitable for food environments (H1) to avoid potential contamination and maximize food safety.
Tight and sealed terminal box – Prevents water from entering. The rotatable cover allows to adjust cable entry in all directions.
Cooling – Sizes 71 to 90 without a cooling fan, sizes 100 to 132 with the cooling fan.
Stainless steel housing – Smooth, round AISI304 stainless steel housing for easy cleaning.
Rating plate data – Laser etched onto the frame eliminates contamination trapped beneath traditional rating plates.
Precision die-cast aluminum rotor – Precision balanced and coated with an epoxy primer to resist corrosion.
Stainless steel shaft – Prevents rust and corrosion
Other stainless steel motors
 |
 |
 |
 |
| Stainless steel permanent magnet motor | Water-cooled stainless steel motor | Food industry electric motor | Stainless steel motor |
 |
 |
 |
 |
| IEC emulsified food machinery AC motor | NEMA 56C asynchronous motor | IEC stainless steel AC motor | IEC all stainless steel high-efficiency motor |
 |
 |
 |
|
| Chicken and duck depilation equipment motor | NEMA food-grade stainless steel motor | Food-grade IEC stainless steel motor |
Stainless Steel Motor Manufacturer
In order to ensure reliable consumer protection, the design requirements for food and pharmaceutical machinery have always been high. All components in the machine must also meet these requirements.
Since its establishment, Power-trans has continuously developed stainless steel servo motors, gear motors, and torque motors with hygienic designs. A comprehensive range of products can be used with corrosive and effective cleaners and disinfectants as well as high-pressure cleaners to achieve CIP.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.