Sus304 Medium Link Chain
* Material: Stainless Steel SS304, SS316, SS316L
* Surface Treatment: Polishing
* Tension Grade: G30/G50
* Size Customization is Available
* In Short/Mid/Long Link Series
* Advantage: Rust-Proof and Corrosion Protection
Sus304 Medium Link Chain
This chain(Sus304 Medium Link Chain) is used in many applications, including construction projects and shade sails. However, chains are not recommended for lifting applications. For this purpose, rated lifting chains are available in stainless steel hardware.
In addition to corrosion resistance, Sus304 also has high fracture toughness. This means it can withstand a lot of pressure. In addition, it is highly resistant to intergranular corrosion. Unlike austenitic steels, 304 stainless steel does not become brittle even at high temperatures.
Our company also provides many conveyor chain types. If you need to know more product types and information, such as conveyor chain, you can contact us by email or communicate with our online staff. Looking forward to working with you.
 |
 |
 |
 |
We offer a full line of high quality bulk chains that meet and exceed NACM, ASTM and OSHA, stainless steel and galvanized specifications.
- Ring chains, also known as torus chains, are widely used in industries in different countries.
- We can also supply different grades of chains, such as G30 chain, G43 chain, G70 chain.
- Stainless steel chain ring, compared with alloy steel or carbon steel chain ring, the material is 304 or 316, suitable for corrosive environment such as food and chemicals, and also suitable for high and low temperature conditions.
- We offer stainless steel chains in standard short, medium and long chains.
link chain size
Chain pitch and gauge are essential factors in determining chain size. The length also depends on the number of drive links or lugs. The next largest chain is 5mm and is usually paired with a large bail pendant. The average link size of the chain is 2.5x3mm. There are many chains, including snake chains, ball chains, and linkless chains.
When choosing a chain, consider the maximum load it can handle. Two-pitch offset links are more durable than single-pitch links. Two-pitch offset links are generally preferred, but you can also use links with odd-numbered links. If you’re looking for a chain with high tensile strength, look for two-pitch offset links.
| One-stop Supplier of Chain Transmission Products | |||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Related sprockets
Properly installed sprockets can increase the efficiency of a chain-driven motion system. They can also carry heavy loads, making them essential to many chain-driven motion systems. Proper selection of sprockets is essential to ensure proper operation and prevent damage to the machine. When selecting a sprocket, consider your system’s size and type of fit.
Sprocket life varies widely, depending on several factors, including riding style and conditions, chain pitch and size, and maintenance regime. Typically, a brand new steel sprocket’s lifespan is less than 5,000 km. For longer life, consider using a sprocket with “hardened teeth.” Hardened teeth can triple the life of the sprocket.
A sprocket is a toothed wheel that meshes with a chain as it rotates. They are different from gears because they do not mesh directly. Sprockets are used in everything from disposable cameras to professional bicycles. Besides bicycles, they are also used in various motor vehicles.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.