Factory Price Uhmw-pe Plastic Large Sprocket Wheel Plastic Gear
Custom non-standard wheel Plastic Large Sprocket Wheel
Plastic Large Sprocket Wheel
- wear resistance
- corrosion resistance
- low temperature resistant
- self-lubricating
- shock resistance
- non-stick
- health non-toxic
Product Display
 |
 |
 |
Small plastic gear
Small plastic gears are used in a variety of applications. They can be lightweight and have a low coefficient of friction. The curved and load-sharing properties of their teeth further add to their strength. They are also suitable for wet and food preparation environments. Additionally, their low density makes them suitable for a variety of applications.
Several factors can affect the performance of small plastic gears. For example, elastic modulus depends on temperature, loading rate, humidity and chemical exposure. Temperature data can be obtained by tensile testing and dynamic mechanical analysis (DMA). In addition, the selection of dimensionally stable materials is also essential. This feature helps maintain the tooth contact ratio and tip clearance of the gear, as well as the overall geometry of the gear. However, plastic parts are also affected by moisture and manufacturing processes, which can affect their dimensions.
Plastic gears come in all sizes and shapes. Their faces are usually less than 0.01 inches wide. Some of them also have a tolerance range of +0.0001 inches. They are typically used in pumping and cutting applications. Additionally, they are compatible with different standards, including MIL-STD-45662A and ANSI-45208A.
Plastic gears are made from various materials, including polyacetal and nylon. The former favors dimensional stability but absorbs moisture.
Q&A
Q1. When can I get the price?
A: We usually quote within 24 hours after receiving your inquiry. If you are urgent, Please call us or let us know in your email so we can prioritize your inquiry.
Q2. How long is the lead time for the mold?
A: It all depends on the size and complexity of the mold. Usually, the delivery time is 25-35 days. If the mold is simple and insignificant, we can do it within 15 days.
Q3. I don’t have drawings; how should I start a new project?
A: You can provide us with samples, and we will help complete the drawing design.
Q4. How to ensure product quality before delivery?
A: If you do not come to our factory and there is no third-party inspection, We will be your inspector. We will give you a video with details of the production process, including process reports, product dimensions, structural and surface details, packaging details, etc.
As a plastic gear rack and plastic gear supplier, we always aim to provide the highest quality products and the most comprehensive services and look forward to cooperating with you.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.