Bonfiglioli 710C Series Track Drive Planetary Gearbox Reducer Replacement 710C3B
710C Series Track Drive
1. Output torque range: 1000-60000 N.m
2. Gear ratios: i=5.3-142
3. Support: thegearbox has rotating housing flanges to fit wheel
4. Applicable motors: axial piston hydraulic motors, hydraulic orbit motors or others
5. Hydraulic motor options: pressure relief valve, overcenter valve
6. Bearing: robust bearing system absorbing the forces exerted by the ring gear
7. Brake: hydraulically released parking brake
8. Others: 710c Series wheel drives with manual disconnect application
9. Large radial and axial load capacity due to the use of strong tapered roller bearings.
10. Reliable oil seal protection, designed according to our field experience.
11. Universal and SAE input direct mounting flanges
12. The units are designed for their direct mounting into the wheel rims.
What are Some Signs that the 710C Series Track Drive Needs Maintenance?
There are several indications that the 707C series track drive may require maintenance. Here are some precautions to note:
Reduced efficiency: If the operation of the machine or equipment is not as smooth or efficient as usual, this may be a sign that the 707C series track transmission needs maintenance. Wear or damage to the track transmission system can lead to increased resistance and friction, leading to a decrease in performance.
- Chain noise: If the noise emitted by the track chain is greater than usual, this may be a sign that the 707C series track transmission needs repair. Worn or damaged chains can lead to increased friction and wear, resulting in increased noise.
- Sprocket wear: If the teeth of the transmission sprocket are worn or damaged, this may be a sign that the 707C series track drive needs maintenance. Worn or damaged sprockets can affect the performance of the system, leading to reduced efficiency and increased wear.
- Idler wear: If the idler bearing is worn or damaged, this may be a sign that the 707C series track drive needs maintenance. Worn or damaged idlers can affect the tension of the system, leading to reduced efficiency and increased wear.
- Regular maintenance plan: If the 707C series track drive has been inspected or repaired for some time, this may be a sign that it needs maintenance. Regular maintenance is crucial for the smooth and efficient operation of machines or equipment.
Overall, it is important to regularly inspect the 707C series track drive and pay attention to any signs of wear or performance issues. Proper maintenance and upkeep can help prevent these problems and ensure the longevity and reliable operation of machinery or equipment.
Raleted Planetary Gearboxes
You can click on the image to learn about the corresponding related products
 |
 |
 |
 |
| Planetary Feed Mixer Gearbox | Tracked Vehicle | Winch Drive | Wheeled Vehicle Drive |
 |
 |
 |
 |
| Slewing Drive | Wind Turbines Drive | Inline Planetary gearbox | Right Angle Planetary gearbox |
Replaceable Planetary Gearbox Models
| Trasmital bonfiglioli Models | 700C1H | 701C1 | 703C2H | 705C2H | 706C3H | 707C3B | 709C3B |
| Our Models | Power-trans 700C1H | Power-trans 701C1 | Power-trans 703C2H | Power-trans 705C2H | Power-trans 706C3H | Power-trans 707C3B | Power-trans 709C3B |
| Trasmital bonfiglioli Models | 710C3B | 711C3B | 715C3B | 716C3B | 717C3H | 718C3H | 720C3H |
| Our Models | Power-trans 710C3B | Power-trans 711C3B | Power-trans 715C3B | Power-trans 716C3B | Power-trans 717C3H | Power-trans 718C3H | Power-trans 720C3H |
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.