Split Taper Bushings
UO Split Taper Bushings
The split tapered bushing is keyed to the shaft for a drive even if the fasteners are loose. And since it’s interchangeable with other split tapered bushing types, you can use it to upgrade existing machines.
Split tapered bushings are also more durable than flat waisted or flat washers. Its anti-seize and lubricant-filled holes reduce corrosion. Remove all assembly parts before installing the split cone bushing. Then, insert the screws into the holes and tighten them alternately until the bushing is properly installed. Split cones may require a wedge to separate them from the assembly hub.
R1 Split Taper Bushings
- Bushing Type: R1
- Bore Size: 1-1/16″、1-1/4″、1-1/8″、1-3/16″、1-3/8″、1-7/16″、28mm、3-11/16″、3-3/16″、30mm、32mm、35mm、36mm、38mm、39mm、40mm、42mm、45mm、48mm、50mm、55mm、60mm、65mm、70mm、75mm、85mm、90mm、95mm
- Dimension (L): 2-7/8″
- Dimension (U): 5/8″
- Dimension (T): 2-1/4″
- Dimension (D): 2.875″
- Dimension (H): 5-3/8″
- Dimension (V): 4-5/8″
- Dimension (W): 3/4″
- Dimension (X): 2″
- Dimension (Y): 1/4″
- Dimension (R): 1/4″
- Dimension (S): 9/32″
- Cap Screws Amount: 3
- Cap Screw Size: 3/8″ X 1-3/4″
- Wrench Torque: 348 LBS
- Weight: 7.5 LBS
P3 Split Taper Bushings
- Bushing Type: P3
- Bore Size: 1-1/2″、1-1/4″、1-1/8″、1-3/16″、1-3/8″、1-5/8″、1-7/16″、
- Dimension (L): 4-7/16″
- Dimension (U): 13/32″
- Dimension (T): 4-1/32″
- Dimension (D): 1.9375″
- Dimension (H): 3″
- Dimension (V): 27/16″
- Dimension (W): 3/8″
- Dimension (X): 3-13/16″
- Dimension (Y): 7/32″
- Dimension (R): 7/32″
- Dimension (S): 1/4″
S2 Split Taper Bushings
- Bushing Type: S2
- Bore Size: 1-15/16″、1-7/8″、2″、2-1/2″、2-1/4″、2-1/8″、2-11/16″、2-3/16″、2-3/4″、2-3/8″、2-5/8″、2-7/8″、3″、3-1/2″、3-1/4″、3-1/8″、3-11/16″、3-3/16″、3-3/4″、3-5/8″、3-7/8″、4″、4-1/8″、
G Split Taper Bushings
Tapered bushings(G Split Taper Bushings) are used in a wide variety of applications. They are often used in power transmission components such as shafts attached to rollers or pulleys. These tapered bushings feature a wedge action handle for easy locking and removal without deforming the shaft. There are two main types of tapered bushings: QD and Taper-Lock. Each of them has a specific hub size and a different type of locking mechanism.
P1 Split Taper Bushings
- Dimension (L): 1-15/16″3
- Dimension (U): 13/32″
- Dimension (T): 1-17/32″
- Dimension (D): 1.9375″
- Dimension (H): 3″
- Dimension (V): 27/16″
- Dimension (W): 3/8″
- Dimension (X): 15/16″
- Dimension (Y): 7/32″
- Dimension (R): 7/32″
P2 Split Taper Bushings
P2 Split Taper Bushings are designed to mount sprockets and sheaves on a shaft. They are engineered to withstand the torque generated during power transmission. Their unique keyway design increases the hold strength and adjustability for different shaft diameters. Bushings also feature a keyway for locking the bushing onto a shaft. The weight of these components depends on the bore diameter and the type of shaft.
W Type Bushings
Type W bushings are commonly used on shafts of industrial pumps and motors. They have oil expansion space and sight glass to keep debris out of the bushing. They are available with or without a collar and gland nut. Here’s a quick guide to help you choose the best W bushing for your application. Once you have selected the W bushing, you are ready to install.
R2 Split Taper Bushings
- Bushing Type: R2
- Bore Size: 1-1/2″、1-11/16″、1-3/4″、1-3/8″、1-5/8″、1-7/16″、1-7/8″、2″、2-1/2″、2-1/4″、2-11/16″、2-5/8″、3“、3-1/2″、3-1/4″、3-1/8″、3-3/16″、3-5/8″、35mm、36mm、38mm、39mm、40mm、42mm、45mm、50mm、55mm、60mm、65mm、70mm、75mm、80mm、85mm、90mm
- Dimension (L): 4-7/8″
- Dimension (U): 5/8″
- Dimension (T): 4-1/4″
- Dimension (D): 4.000″