WPDX Series Worm Gearboxes
WPDX series worm gearboxes, also known as WPDX worm gear reducers, are composed of one or several pairs of meshing gears, worm gears, worms, etc., installed in a rigid, sealed box and used as an independent part of the machine. It is often used as a transmission device for deceleration between the prime mover and the working machine. On the contrary, on a few occasions, such as centrifugal compressors and other speed-increasing transmission devices, such transmission devices are called speed-increasing machines.
WPS Series Worm Gearboxes
WPS series worm gearbox is developed based on the WD Worm gearbox for the gearbox. The worm is made of 45# high-quality steel by heat treatment. The worm wheel is made of tin bronze. The wear resistance is good, especially in the bearing capacity. This type of gearbox is mainly used for the reduction transmission of various mechanical equipment such as plastics, metallurgy, beverages, mining, lifting and transportation, and chemical construction. For industry applications that demand reliable speed reduction at high energy efficiency, worm gearbox for electric motors offers a perfect solution.
WPA Series Worm Gearboxes
WPA series worm gearbox, the worm is made of 45 # high-quality steel by heat treatment, and the worm wheel is cast with tin bronze. It is mainly suitable for the deceleration transmission of various mechanical equipment such as plastics, metallurgy, beverage, mine, lifting and transportation, chemical construction, etc. It has good wear resistance, especially in bearing capacity.
WPDA Series Worm Gearboxes
WPDA series worm gearboxes, based on years of experience, use designed teeth surfaces with unsurpassed torque transfer performance with excellent performance, efficiency, and cost. The worm gear system transmits power through sliding contact, resulting in a low vibration, noise, little backlash, and self-locking property. The structural strength of our cast iron, Heavy-duty worm gearboxes are available in speed ratios ranging from 10:1 to 60:1. Ratios ranging of double steps from 200:1 to 3600:1. Also, our gearboxes are supplied with a breather plug and oil mirror, which you can judge whether enough oil inside.
WPDS Series Worm Gearboxes
The worm gearbox assembly from worm wheel, worm gear, housing, oil seal, bearings, etc.WPDS series iron case worm gearbox and gear motor wide used in different industries like food machines, conveyor equipment, industrial machine, foodstuff, ceramics, chemicals, packing, dyeing, woodworking, glass, etc.
WPKZ Series Worm Gearboxes
The basic structure of a worm gear reducer is mainly composed of transmission parts, worm gear, shaft, bearing, box, and accessories. It can be divided into three essential structural parts: box, worm gear, and worm, bearing, and shaft combination. The box is the base of all the accessories in the worm gear reducer. It is an essential accessory to support and fix the shafting parts, ensure the correct relative position of the transmission accessories, and support the load acting on the reducer. The worm gear is mainly used to transfer motion and power between two staggered shafts, and bearings and shafts are used primarily to transfer power and operation and improve efficiency.
WPZ Series Worm Gearboxes
WPZ series worm gearbox is developed based on a WD worm gear reducer; the worm is made of excellent 45 # steel after heat treatment processing and manufacturing; worm gear with the tin bronze cast, wear-resisting performance is good, especially on the bearing capacity is more prominent, is mainly used in plastics, metallurgy, beverage, mining, lifting transport, chemical reduction drive construction and other mechanical equipment.
WPKS Series Worm Gearboxes
The basic structure of a worm gearbox is mainly composed of transmission parts, worm gear, shaft, bearing, box, and accessories. It can be divided into three essential structural parts: box, worm gear, and worm, approach, and shaft combination. The box is the base of all accessories in the worm gear reducer. It is an essential accessory to support and fix the shafting components, ensure the correct relative position of the transmission accessories and keep the load acting on the reducer. The worm gear is mainly used to transmit the motion and power between the two staggered shafts, and the bearing and shaft are mainly used to send energy, operate, and improve efficiency.
Ordinary Medium Link Chain
- Material: Low Carbon Steel
- Surface Treatment: Mainly Polishing, Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G25
- In Short/Mid/Long Link Series
Steel Double Helical Gear
Steel double-helical gear
Material: SS, customized
Diameter: 20mm, customized
Straight Running Flat-top Chain with Low Noise Accumulation Rollers
This new series of thermoplastic chains is the solution to the pressure created between products and the conveying surface created by the accumulation of products. This is achieved by having a series of small-width rollers, which provides a stable conveying surface and enables the product to be handled without damage; however, the chain still provides a positive forward motion and is based on our standard series. These chains feature rollers made of low-friction and low-noise materials for reduced packing line stress and quiet operation.
Sideflexing Flat-top Chain with Low Noise Accumulation Rollers
Besides automating operations at your workplace, a side flexing chain with low noise accumulation rollers conveyor offers much more perks, including adaptability, higher levels of operations control, and risk reduction. Conveyor machinery is highly adaptable to various processing functions and boasts the flexibility to adjust to multiple material sizes and weights. Also, by minimizing the probability of human error in the movement of materials, a side flexing chain with low noise accumulation rollers conveyor allows you to take higher control of operations at your workplace.
Medical Stainless Spur Gear
Dimension:Φ3mm- Φ120mm
Module: M0.25
Material Type: Stainless steel, as the customer required
Sus304 Medium Link Chain
* Material: Stainless Steel SS304, SS316, SS316L
* Surface Treatment: Polishing
* Tension Grade: G30/G50
* Size Customization is Available
* In Short/Mid/Long Link Series
* Advantage: Rust-Proof and Corrosion Protection
Automotive Double Helical Gear
Dimension:Φ15
Module: M0.25
Material Type: Plastic, POM, Nylon…as customer required
WPKA Series Worm Gearboxes
WPKA series worm gearboxes products are made of high-quality steel by heat treatment. The worm wheel is made of tin bronze. The wear resistance is good, especially in the bearing capacity. It is mainly used in plastics, metallurgy, beverage, mining, lifting and transportation, chemical industry. The deceleration transmission products of various mechanical equipment such as construction have stable transmission, large carrying capacity, low noise, compact structure, and significant reduction ratio; wide versatility and can be used with various mechanical equipment.
WPDO Series Worm Gearboxes
The worm transmission of the worm gearbox is simply spiral transmission, which is multi-tooth meshing transmission, so the transmission is stable, the noise is relatively small, and it can self-lock. When the lead angle of the worm is less than the equivalent between the meshing teeth, and there is a conflict, the arrangement also has a self-locking ability, which can complete the reverse self-locking, and can only drive the worm gear through the worm, not through the worm gear. Just like the self-locking worm arrangement used in heavy machinery, its reverse self-locking ability can complete the effectiveness of maintenance.
WPO Series Worm Gearboxes
WPO series worm gearbox is developed based on the WD reducer, the worm 45 # high-quality steel heat treatment processing. It has good wear resistance, especially in bearing capacity. It is mainly suitable for decelerating the transmission of various mechanical equipment such as plastics, metallurgy, beverage, mine, lifting and transportation, chemical construction, etc.