Star PTO Shaft
Star PTO shaft which helps tractor to drive is a metric series of PTO.
We offer a complete PTO shaft assembly at very competitive prices.
Fluid Couplings
A fluid coupling is referred to as a hydraulic fluid coupling which seems to be a hydrodynamic device that is used to transmit the rotating mechanical power through the acceleration as well as the deceleration of the hydraulic fluid.
35 Plastic Sprockets
Our plastic sprockets have a much greater tooth deflection than a standard steel sprocket does. This means that several teeth will bear the load of the roller chain. With several teeth in contact, this means that the load capacity of the sprocket will match approximately to the full working load of the chain.
Leaf Chains for Sky Stacker LH2066 LH2466 LH2844 LH2846 LH2866
Leaf chains are made of interlaced plates held together by rivet pins. They are manufactured with precision, just like roller chains. The leaf chains are designed for applications that require a durable, strong linkage. They are made from special steel and undergo unique heat treatments, which ensure their strength and durability. Leaf chains are identified by the pitch and lacing, so if you’re using your Sky Stacker for a new application, you should use the BL series.
UO Split Taper Bushings
The split tapered bushing is keyed to the shaft for a drive even if the fasteners are loose. And since it’s interchangeable with other split tapered bushing types, you can use it to upgrade existing machines.
Split tapered bushings are also more durable than flat waisted or flat washers. Its anti-seize and lubricant-filled holes reduce corrosion. Remove all assembly parts before installing the split cone bushing. Then, insert the screws into the holes and tighten them alternately until the bushing is properly installed. Split cones may require a wedge to separate them from the assembly hub.
CA550K39M Agricultural Chain K39M Attachments CA550&CA557 series
CA550 K39M attachment is a two-side, two-hole attachment manufactured for the CA550 roller chain. We can supply the CA550 roller chain with K39M attachments in any configuration needed to meet your needs. This K39M attachment is manufactured using precision hardened components to ensure durability, working life, and strength.
Short Pitch Conveyor Chains with Top Rollers
Short pitch conveyor chains with top rollers allow goods to sit on a roller and move along while the chain runs. They are used in applications where high speed conveyance is required. Top rollers can be made of metal or plastic. They can be ordered custom-made to meet specific needs.
700 Class Pintle Chain 701/720/720S/720SC/730/730SC/788
700 class pintle chains can be mostly used in clarifiers and bars screens DAF, API, and various other conveying applications. We provide cast, steel plastic, stainless 700 class steel pintle chains, as well as an extensive range of sprockets and attachments.
Palm Oil Conveyor Mill Chain With Straight Plate
A palm oil mill chain(Mill Chain With Straight Plate) is a transmission chain. It working with convey materials in palm oil production. In the palm oil production line, the chain needs to have good tensile strength and wear resistance to be produced safely and efficiently.
Double Pitch Conveyor Chains with Extended Pins C2040 C2042 C2050 C2052
Double pitch conveyor chains are designed for medium-duty material handling applications. They have the same basic construction as single pitch chains, but have longer links, flat-shaped link plates, and smaller rollers. These chains are regulated by the ISO 1275-A standard. In the auto industry, these chains are commonly used in a variety of applications.
WR78-4/WH78-4 Welded Steel Chain C-Hub Sprockets
This WH78-4 sprocket will work with both WR78-4 welded steel chain and the WH78-4 welded steel chain. We can supply this sprocket manufactured out of mild steel or QT400 hardened steel and either solid construction, split to bolt, or split for welding construction per request. Also, we can supply this sprocket machined or precision hobbed for high-speed applications. Additionally, we can supply this sprocket as a brass, nylon, or UHMW idler complete with grease grooves and grease fittings.
Welded Straight Sidebar Chain WWRC18 WRC82 WRC124 WRC132 WHC131 WRC131 WHC132
Welded Straight Sidebar Chain WWRC-18,WRC-82,WRC-124,WRC-132,WHC131
Conveyor Chains with Special Extended Pins 12AF19 12BF13 10B-D9 10B-D12 12B-D8
Whether your needs involve conveying dry materials, conveying liquids, or handling two-piece construction cans and tubes, conveyor chains with special extended pins will help you move goods smoothly. These special attachments are made of stainless steel or surface-treated stainless steel. Various styles are available to meet your needs.
A Series Conveyor Chain Special Attachments
Many industries have developed unique attachments for their specific industry. One common example is the film gripper chain. A chain with serrated or toothed plates for wood applications is another example. Chains with rubber or plastic tops allow for high-speed operation and minimal damage to products. The tops of sawmill chains might have sharp edges to ensure maximum durability.
Anti-sidebow Chains for Pushing Window P11.5
An intelligent door and window anti-bending chain is a kind of chain that is used to prevent a window from being bent. It can be applied to flat push windows and cased windows. It is powered by an electric motor or a hydraulic cylinder. It is made of high-quality steel and is treated with a zinc-nickel alloy surface anti-corrosion process. It is durable and noise-free. It also has high stability and can withstand a long time of use.
Universal Movement Conveyor Chains SJ406S-50 P210
Universal motion conveyor chains are the main traction components of light-duty closed-track suspended conveyors. They consist of two sets of hinges that are perpendicular to each other. The first set of hinges is fixed, while the second set of hinges is movable. This allows the conveyor chain to move up to three kilometers per person.
B Series Conveyor Chain Special Attachments
Conveyor chains are available in a variety of sizes, pitches, and special attachments. The minimum pitch is dictated by the strength of wheel teeth, while the maximum pitch is determined by plate rigidity. A range of bushes can be installed between link plates to increase the pitch. The chain must also be properly lubricated to prevent corrosion and power absorption. Quality mineral oil of medium viscosity is sufficient in normal conditions. Some chains also have self-lubricating systems.
Multiflex Chains
The Multiflex Chains feature a patented top plate design that closes the chain surface on curves. These chains’ widely application:in the packaging and automotive industries. But they also come with features such as finger-trap-free surfaces on the sprockets.
Universal Movement Conveyor Chains SJ250F3 SJ250F4 SJ300F3 SJ300F4
Universal motion conveyor chains would be the most important traction parts of light-duty closed-track suspended conveyors. They include two sets of hinges perpendicular to just about every other. The first set of hinges is fixed, even though the second set is movable. This allows the conveyor chain to move up to 3 kilometers per person.
Tobacco Conveyor Chains C2082F35 C2082HF70
Tobacco conveyor chains transport tobacco from a single spot to an additional one. They can be pretty effective and easy to maintain. The tobacco rods are placed obliquely about the conveyor chain, as well as the chain moves up and down. Staff at distinctive heights have an entry on the conveyor chain, which lowers the chance of damage or accidents.
Short Pitch Conveyor Chains with Extended Pins
Short pitch conveyor chains with extended pins are made from stainless steel and are used in various industrial sectors. This type of chain is suitable for both hot and cold temperature environments and has high corrosion resistance. They have an extended life cycle and are ideal for conveying various products. They have an average plate thickness and a thicker roller than the standard ones.
Narrow Series Offset Sidebar Welded Chain and Attachment
Narrow Series Offset Sidebar Welded Chain and Attachment
Conveyor Chains for Steel Mill P300F5
Steel mill conveyor chains are utilized in lumber mills, pulp and plywood mills, bucket elevators, and material handling applications. It delivers a cost-effective means of conveying supplies. Determined by the chain sort, the chain can be heat or induction hardened to enhance effect strength and dress in resistance.
Conveyor Chains for Paper Mill 63PF2
To ensure the performance of the conveyor chain, regular maintenance checks are very important. Improperly maintained chains can lead to premature failure. Also, they may wear out excessively. The sprocket must be replaced immediately when the teeth are worn to about 1/4 inch below the original surface engagement.
Conveyor Chains for Steel Mill P600F3 P300F7
Conveyor chains in steel mills are utilized to transport metal scrap, steel and steel pipes, and steel plates. Steel mill conveyors also can deal with aluminum, steel components, castings, together with other materials. Their weight restrict depends on the surface place conveyed, the motor energy rating, and the conveyor help framework.
Conveyor Chains with Outboard Rollers 40S40-PSR50-SR-C60S80S80S-C
Outboard roller chain construction makes for a highly compact conveyor. The ability to flex backward adds to this by allowing an easy layout on the return side to save space. Since a large number of rollers can be installed, a conveyor can be easily made where small objects are placed directly with no pallet.
Conveyor Chains for Steel Mill P500 P500F1 P500F2
Steel mill conveyor chains are used in lumber mills, pulp and plywood mills, bucket elevators, and material handling applications. It provides a cost-effective way of conveying materials. Depending on the chain type, the chain can be heat or induction hardened to improve impact strength and wear resistance.