IP67 Waterproof NEMA Stainless Steel Motor TENV
This NEMA Stainless Steel Motor has two structural forms: fully enclosed self-cooling and fully enclosed fan cooling. It conforms to NEMA standards and has high-efficiency characteristics. The efficiency of motors above 1HP meets the premium efficiency standard. The motor shell, end cover, hood, shaft outlet, foot, and junction box are made of stainless steel, and the outer surface is not painted. This motor is widely used in food machinery and pharmaceutical machinery industry.
B5 Flange Mounted Stainless Steel Motor-TEFC For Food machinery
The stainless steel motors produced by Power-trans company can be made of stainless steel 302, 304, or 316 according to customer requirements. The standard product is made of food-grade 304 stainless steel, which can be used for a long time without rust and corrosion. The standard motor shaft is made of stainless steel 420.
Detachable Chain 32W-SD 55-SD 62-SD 55-SE 55-SH 62-SH 62-SH1
Detachable Chain 32W-SD 55-SD 62-SD 55-SE 55-SH 62-SH 62-SH1
Flat Top Chains Sideflexing with Snap-on Gripper 1874TAB-G
1874TAB-G Flat top chains are side-flexing snap-on chains. It is designed with plastic flights assembled on a steel roller chain with extended pins.1874 series chains are 1.5-inch pitch, have a top plate thickness of 0.12 inches, and utilize a 63 base chain. The chains have a smooth top and are versatile enough to convey everything from individual units to packaged and cased goods. Features TAB curve retention. Chain is available with carbon & stainless steel top plates on carbon and stainless steel base chains for different characteristics. The chain operates on standard #60 series sprockets for true chain/sprocket interaction.
Automobile Roller Chains for Engine Timing 05E 05BT 06AT 06BT 06BT-2 06BTH-2
Roller chain for engine timing is mainly used for automobile engine timing systems, oil pumps, balance shafts, standard rail pump drive systems,s, etc. This chain is the critical engine component with high strength and durability.
IEC Motor B5T Flange Mounted Stainless Steel Motor TENV replacement of SEW Motor
Power-trans’s severe washdown duty motors are designed to withstand the extreme and stringent sanitation requirements of today’s food processing, pharmaceutical, packaging, and beverage industries. Tested to meet the demanding IP69K specification using high-pressure steam and water, Power-trans’s food-safe stainless motors provide durable protection against the most extreme caustic washdown environments while maintaining a hygienic level to ensure uncompromised food safety.
Automotive Bush Chains For Engine Timing 05CT 06D C35F2-2
Roller chain has the characteristics of higher than average service life characteristics because it has excellent wear resistance, high consistency, unparalleled accuracy, and higher fracture strength and fatigue strength than ISO standards. All chains are pre-tensioned and provide efficient initial lubrication.
IEC B5 Flange Mounted Stainless Steel Motor -TENV
IEC Flange Mounted Stainless Steel Motor -TENV
Stainless steel motor is the most comprehensive motor. Because of its diversity, it can be used in all possible environments. Its advantages are clear at a glance:
- IP68 waterproof and dustproof
- Clean room classification ISO 1 according to DIN 14644
- ATEX certification for ATEX zone 1
- Acid and chemical resistance
- Hydrogen peroxide can be used for sterilization
- Efficient and powerful
CA550 Agricultural Chain A1F5 Attachments 55&CA550&CA557&S77 series
This 55vd K1 accessory is manufactured for high strength and durability. It can be assembled to the chain in any required configuration or provided as an accessory for field installation. Please contact us for a quote or more information, and we will be happy to help you.
Short Pitch Precision chains Stainless Steel Roller Chain (A Series)
Roller chains are known for their high strength and long-lasting fatigue durability. Dimensions fully comply with BS standards. It can be assembled into single row, double row, and multi-row, suitable for transmission power and different configuration space. According to the different working environments, there are different chains with zinc plating, nickel plating, chromium plating, and Dacromet treatment.
Fertilizer Seeder Gearbox SF230 for Fertilizer Broadcaster
The Fertilizer Seeder Gearbox SF230 is a crucial component of a fertilizer broadcaster, which is used in agricultural operations to evenly distribute fertilizers and seeds onto fields. The gearbox plays a key role in controlling the speed and direction of the spreading mechanism, allowing for precise and efficient application of fertilizers. The SF230 gearbox is designed specifically for fertilizer broadcasters and is built to withstand the demanding conditions of agricultural use. It is typically made from durable materials such as cast iron or steel to ensure longevity and resistance to wear and tear.
Steel Pintle Chain Attachments K1 K19
Steel pin chain attachments are made use of in a variety of applications, such as spreading fertilizers and conveying materials. These chains have a versatile layout that makes them conveniently mixed with numerous attachments. Normal applications incorporate feed systems, spray boxes, and granular materials conveying. You can even customize these chains with customized add-ons to meet your distinct requirements.
Sprockets and Idler Wheels for 820-831-LBP831 Chain
Plastic sprockets are commonly used as an alternative to metal sprockets in power transmission and roller chain applications. Manufactured from cast oil-filled nylon, they offer a wide range of benefits over traditional metal counterparts, such as self-lubricating properties and a reduced coefficient of friction. This helps reduce wear on the plastic chain and noise levels of the application. Other benefits include better resistance to corrosion, increased impact strength, and lighter weight than metal alternatives. Split sprockets can also be supplied for applications whereby the machinery is not able to be dismantled. They are provided in two halves and can be assembled around the installation, removing the need for equipment to be taken apart.
Shaft Collars With Double Splits Inch Series
The inch series two piece shaft collar is a type of mechanical component used to attach and secure rotating shafts to other mechanical components, such as gears, sprockets, or bearings. It consists of two separate pieces, a collar and a set screw, which are designed to fit around the shaft and tighten down to hold it in place. The two piece shaft collar itself is typically made of metal, such as steel or aluminum, and is designed to fit snugly around the shaft. It has a smooth inner surface that prevents damage to the shaft and an outer surface that may have grooves, knurls, or other features to enhance its grip. The set screw is inserted into a threaded hole in the shaft collar and tightened against the shaft to hold it in place.
5050 Taper Lock Bushings
- Bushing Number: 5050
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 7″
- Dimension (B): 5″
- Dimension (D): 6.72″
- Number Of Set Screws: 3
- Threads: 7/8″
- Length: 2-1/4″
- Dimension (G): 37°
- Wrench Torque: 3,100 LBS
- Weight: 32 LBS
G30 DIN763 Polishing Long Link Chains
* Material: Low Carbon Steel
* Surface Treatment: Mainly Polishing, Electro-Galvanized
* Tension Grade: G25/G30
* In Short/Mid/Long Link Series
Hypoid Gear
Hypoid gears are beveled gears similar to spiral ones, except they transmit motion between axes that do not intersect. The small gear shaft (hypoid pinion side) is offset from the giant gear shaft (hypoid gear side). Given the proper offset amount, the pinion shaft and large gear shaft can pass without interference, enabling the shafts to be supported securely on both ends.
PIN Couplings
Bushed Pin-type coupling is referred to as the one which is most commonly used for slight parallel misalignment, angular misalignment, or any type of axial misalignment of any of the two shafts. This type of coupling is found to be a modified version of rigid flange coupling. These are found consisting two halves which are usually dissimilar in the construction bolts which are known as pins, rubber bushes that are used over pins. There seems to be a clearance of around 5 mm within the faces of both halves of the coupling. There seems to be no rigid connection within them whether the drive is done through compressed rubber or leather bushes.
Screw Gear crossed helical gears
Screw gears, also sometimes called crossed helical gears, are helical gears used in motion transmission between non-intersecting shafts. Screw gears can be used to transmit power between non-parallel shafts. This is because the helical teeth allow the gears to mesh even when the shafts are not aligned. Screw gears are also able to transmit high torques, which makes them ideal for applications such as hoists and winches. Screw gears can be made from a variety of materials, including steel, stainless steel, and plastic. The material used will depend on the application and the loads that the gear will be subjected to.
Agricultural Chain Attachments CA550K39MF2 CA557K39MF2 CA557K39MF6 A557F1K39MF3
We focus on metal parts solutions for chains, vehicles, agricultural machinery, construction machinery, transportation equipment, valves, and pump systems.
By keeping manufacturing process design, quality planning, key manufacturing processes, and final quality control in-house, we have mastered the critical ability to provide high-quality mechanical parts and components for customers in China and export markets.
To meet the different mechanical and functional requirements of customers, we produce various metal products for customers based on different blank solutions and technologies.
10B series QD Bushed Sheaves Pulleys for “A” and “B” Belts
10B series pulleys are manufactured for A, AX, AA, 4L, B, BX, BB, and 5L v-belts, ranging from 5.75″ to 38.35″ in diameter. Most of our ten-groove 10B QD bushed pulleys are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. The main benefit of using a QD (quick detachable) pulley is that if the bushing (hub) breaks, you don’t have to replace the whole assembly, or if just the pulley gets worn out, the same principle applies. The other significant benefit is that there is a broader range of bore options with QD pulleys than with the “fixed-bore” style.
8065 Taper Lock Bushings
Bushings offer several advantages for bearing applications. The material is durable and can be made of many types. For example, bronze is suitable for heavy-duty applications at low speeds. There are 17 different types of bronze. Other materials include Oilite, which is an oil-impregnated material ideal for high-speed, low-temperature applications. Whetstone bushings are called “self-lubricating” because the walls of the material absorb lubricant through capillary action, and lubricant is released through heat and pressure.
Variable Speed Sheaves
Speed adjustments are part of the pulley’s design benefits. The secret is within the threaded, angular faced discs that are the core of the V-shaped groove on each pulley. If you need more speed, move the discs toward each other. This alignment produces a belt that simply rides higher in the groove. Achieve a larger pitch diameter than before with this adjustment. Meet every requirement in your industry by slowing the machinery down to a specific rate. Simply increase the space between the two discs, which slows down the belt’s motion.
WPEDKS Series Double Stage Vertical Worm Gearboxes
The material combination of the worm and worm gear of the worm gear reducer must have both wear resistance and good running-in performance. Worm material is generally made of alloy steel or high-quality carbon steel. The worm tooth surface is subjected to carburization, quenching or nitriding, and other heat treatments to obtain higher hardness. Its hardness is generally between 35-55HRC, but there are also more than 60HRC. The material used to make the worm gear ring is tin bronze, which is the most ideal. In processing technology, the mechanical properties of centrifugal casting are the best, followed by casting with metal molds and sand molds.
WPWEK Series Double Stage Worm Gearboxes
Worm gearbox design to improve its application power, the worm gear uses non-ferrous metal as the primary data. The worm generally uses hard steel, so it is easy to generate large heat during the application, plus the influence of the ambient temperature. The temperature of the reducer is challenging to control as the operating temperature range is.
