Herringbone Gears
A herringbone gear is a combination of double helical gears with two helices arranged on opposite sides of the hand. The teeth of the herringbone gears are arranged at an angle called the helix angle, with no gaps between the left and right helixes, appearing in the shape of the letter “V” These letters together form a pattern that resembles a fishbone structure. Since this structure has more than two teeth meshing with each other at the same time, the advantage is that the power transmission is smooth.
4040 Taper Lock Bushings
- Bushing Number: 4040
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 5-3/4″
- Dimension (B): 4″
- Dimension (D): 5.54″
- Number Of Set Screws: 3
- Threads: 5/8″
- Length: 1-3/4″
- Dimension (G): 40°
- Wrench Torque: 1,700 LBS
- Weight: 21 LBS
Light Load Drive Timing Belt Pulley T5/T10/T20 Type
The light load transmission timing belt pulley is suitable for trapezoidal tooth transmission. Made of aluminum, these pulleys have good corrosion resistance. The teeth match up with the grooves along the inside diameter of a timing belt to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width. Pulleys without a shaft diameter have a pilot bore so that you can customize them to your needs.
Timing Belt Pulley S3M Type
A timing belt pulley has teeth or pockets around the diameter of the pulley body. The specialized design maintains accurate timing by locking the pulleys in the system using a belt with similar teeth and pockets. This allows the two rotating shafts to be locked together, allowing them to rotate continuously at the same speed and hold position alignment for the system’s life.
F X 1-3/16″ Inch Size QD Bushing
This E QD style bushing(Inch Size QD Bushing) is a high-strength premium bushing with a 1″ hole. What sets this bushing apart from other bushings is the high-quality steel construction and strict quality control procedures focused on quality, value, and premium quality customer service. We also have a team of highly trained experts to answer any questions you may have. For more information or to get a great quote, please contact us and we’ll be happy to help!
5040 Taper Lock Bushings
Taper Lock Bushing Size Chart
The dimension table below shows the standard dimensions of the taper lock bushing, please note that the following figure is the basic dimension required, the actual installation and removal of the bolt holes may vary.
B14 Face Mounted Stainless Steel Motor TEFC
To ensure reliable consumer protection, the design requirements for food and pharmaceutical machinery have always been high. All components in the machine must also meet these requirements.
Since its establishment, Power-trans has continuously developed stainless steel servo motors, gear motors, and torque motors with hygienic designs. To achieve CIP, a comprehensive range of products can be used with corrosive and effective cleaners, disinfectants, and high-pressure cleaners.
Alloy Steel Internal Ring Gear
Our precision-engineered Ring Gears deliver excellent performance. These are rings having teeth fitted on the periphery of a flex plate or flywheel of an internal combustion engine and find usage in automotive applications.
Sprockets and Idler Wheels for 821-lbp821 Chain
Plastic sprockets are commonly used as an alternative to metal sprockets in power transmission and roller chain applications. Manufactured from cast oil-filled nylon, they offer a wide range of benefits over traditional metal counterparts, such as self-lubricating properties and a reduced coefficient of friction. This helps reduce wear on the plastic chain and noise levels of the application. Other benefits include better resistance to corrosion, increased impact strength, and lighter weight than metal alternatives. Split sprockets can also be supplied for applications whereby the machinery is not able to be dismantled. They are provided in two halves and can be assembled around the installation, removing the need for equipment to be taken apart.
XRV Series Car Wash Gearbox For Automatic Car Wash System
XRV series reducer for an automatic car wash is a special worm gear reducer used for auto car washers， which has the advantages of easy installation， low noise， long life, and high protection class. The protection level can reach IP56. The supporting motor power can be 0.25kw~0.75kw， and matching flanges to meet the different needs of customers.
WPWA Series Universal Speed Worm Gearboxes
A worm gear reducer is a traditional transmission device, the inside is a turbine worm, and the tooth shape is involute. WPWA series worm gearboxes are made of 45 # steel through heat treatment processing. And the worm gear is cast with tin bronze. It has good wear resistance, especially outstanding in bearing capacity. It mainly applies to the reduction drive of various mechanical equipment such as plastic, metallurgy, beverage, mining, hoisting and transportation, and chemical construction.
1108 Taper Lock Bushings
- Bushing Number: 1008
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 1.511″
- Dimension (B): 7/8″
- Dimension (D): 1-29/64″
- Number Of Set Screws: 2
- Threads: 1/4″
- Length: 1/2″
- Wrench Torque: 55 LBS
- Weight: 0.25 LBS
Steel Rack for Sliding Gate Motor Steel Gear Rack For Sliding Gate
There are various options for steel racks(Sliding Gate Motor Gear) for sliding doors. You can choose the size according to your needs, one or two meters. You can also choose a design that fits your gate. These products are suitable for residential and industrial sliding doors. The most popular size is 2m, but you can choose the length according to your requirements. Steel rack with six fixing points. You should make sure your gate has enough space for the rack.
TPW Welded Plate Top Chains
Plate-top chains are a hybrid of steel roller chains and plastic plates – an ingenious way of combining the advantages of both materials. Plate-top chains use specially adapted high-quality rollers for tensile force transmission. The product load is borne by plastic flights that are custom-designed for the respective application, enabling the use of the dry running characteristics of a plastic-to-plastic pairing.
AH226058 Pulley For John Deere Combine Feed House Parts
Compatible with John Deere Combine(s) S670, S670HM, S680, S680HM, S685, S685HM, S690, S690HM
Replaces John Deere OEM nos AH226058
Inside diameter: .648″
Outside diameter: 9.02″
For a Used version of this sku use 443031
All new, rebuilt and used tractor parts have a 1-year warranty