Flexible Couplings
Flexible Couplings
Flexible Shaft Couplings provide torque transmission while helping to improve machine performance and life, but using a low performance coupling or the wrong type of coupling can impede mechanical performance, reduce throughput, and even cause downtime. Products that are too rigid or used outside their recommended ratings can create excessive bearing loads that can impact performance and lifespan.
Diameter
| Size | TYPE | Bush NO: |
Msx.Bore | Types F&H | Type B | Screw over key |
A | C | D | F | Gs | M | ||||
| mm | nch | L | E | J | L | E | ||||||||||
| A40 A40 A40 |
B
F H |
1008 1008 |
32 25 25 |
–
1” 1” |
– 33 33 |
22 22 |
29 29 29 |
33 | 22 | 1/4″UNC | 104 104 104 |
82 82 82 |
– | 11.0 11.0 11.0 |
||
| A50 A50 A50 |
B
F H |
– 1210 1210 |
38 32 32 |
– 11/4″ 11/4″ |
38 38 |
25 25 |
38 38 38 |
45 | 32 | 1/4″UNC | 133 133 133 |
100 100 100 |
79 79 79 |
12.5 12.5 12.5 |
||
| A60 A60 A60 |
B
F H |
1610 1610 |
45 42 42 |
— 15/8” 15/8″ |
42 42 |
25 25 |
38 38 38 |
55 | 38 | 1/4″UNC | 165 165 165 |
125 125 125 |
70 103 103 |
16.5 16.5 16.5 |
||
| A70 A70 A70 |
B F H |
– 1610 1610 |
50 42 42 |
— 15/8″ 15/8″ |
44 42 |
25 25 |
38 38 |
47 | 35
– |
3/8″UNC | 187 187 187 |
144 144 144 |
80 73 73 |
50 50 50 |
13 13 13 |
11.5 11.5 11.5 |
| A80 A80 A80 |
B F H |
2012 2012 |
60 50 50 |
– 2” 2° |
45 45 |
32 32 |
42 42 |
55 | 42 | 3/8″UNC | 211 211 211 |
167 167 167 |
97 93 93 |
54 54 54 |
16 16 16 |
12.5 12.5 12.5 |
| A90 A90 A90 |
B F H |
2517 2517 |
70 60 60 |
– 21/2″ 21/2″ |
59.5 59.5 |
45 45 |
48 48 |
63.5 | 49 | 1/2″UNC | 235 235 235 |
188 188 188 |
112 108 108 |
60 60 60 |
16 16 16 |
13.5 13.5 13.5 |
| A100 A100 A100 |
B F H |
2517 2517 |
80 60 60 |
— 21/2″ 21/2″ |
59.5 59.5 |
45 45 |
48 48 |
70.5 | 56 | 1/2″UNC | 254 254 254 |
216 216 216 |
125 120 120 |
62 62 62 |
16 16 16 |
13.5 13.5 13.5 |
| A110 A110 A110 |
B F H |
2517 2517 |
90 60 60 |
21/2″ 21/2″ |
57.5 57.5 |
45
45 |
48 48 |
75.5 | 63
– |
1/2″UNC | 279 279 279 |
233 233 233 |
128 137 137 |
62 62 62 |
16 16 16 |
12.5 12.5 12.5 |
| A120 A120 A120 |
B F H |
3020 3020 |
100 75 75 |
3″ 3” |
65.5 65.5 |
51 51 |
55 55 |
84.5 | 70 | 5/8″UNC | 314 314 314 |
264 264 264 |
143 149 149 |
67 67 67 |
16 16 16 |
14.5 14.5 14.5 |
| A140 A140 A140 |
B F H |
3535 3535 |
120 90 90 |
31/2″ 31/2″ |
105 105 |
89 89 |
89 89 |
111 | 94 | 3/4″UNC | 359 359 359 |
311 311 311 |
178 195 195 |
73 73 73 |
17 17 17 |
16.0 16.0 16.0 |
| A160 A160 A160 |
B F H |
4040 4040 |
140 110 110 |
41/4” 41/4″ |
17
117 |
102 102 |
92 92 |
117 | 102 | 3/4″UNC | 402 402 402 |
345 345 345 |
187 215 215 |
78 78 78 |
19 19 19 |
15.0 15.0 15.0 |
| A180 A180 A180 |
B F H |
4545 4545 |
150 120 120 |
43/4″ 43/4″ |
137 137 |
114
114 |
104
104 |
137 | 114 – – |
3/4″UNC
– |
470 470 470 |
398 398 398 |
200 251 251 |
94 94 94 |
19 19 19 |
23.0 23.0 23.0 |
| A200 A200 A200 |
B F H |
4545 4545 |
150 120 120 |
43/4″ 43/4″ |
138 138 |
114
114 |
104 104 |
138 | 114
– |
3/4″UNC – |
508 508 508 |
429 429 429 |
200 266 266 |
103 103 103 |
19 19 19 |
24.0 24.0 24.0 |
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.