1310 Taper Lock Bushings
1310 Taper Lock Bushings
Tapered locking bushings have an 8-degree taper to reduce through-hole length. Internal screws hold the bushing in place and give it a thinner profile than flanged bushings. To use a tapered lock bushing, make sure the hub diameter of the assembly matches the shaft hole size. Thorough cleaning of the bushing before installation is critical.
Tapered locking bushings are typically used for tapered assemblies. This flange-like device is used to mount different elements of a transmission, such as chains, belts, pulleys, or gears. The sleeve is manufactured to ISO standards. You will need to order the appropriate tapered lock bushing separately from the hub and axle assembly. The benefits of using tapered locking bushing are numerous.
The size chart below provides standard sizes of tapered lock bushings. While this chart helps meet basic dimensional requirements, it is important to note that actual bolt holes may differ from those in the dimensional chart. Listed here are a few important details to keep in mind before purchasing a tapered locking bushing. The information in this article may be out of date or inaccurate. Please contact the manufacturer for the latest information.
Tapered lock bushings are one of the most common types of flangeless bushings. Bushings of this type are made of precision cast iron. It is computer etched for size identification. High-strength screws attach the tapered portion of the assembly to the hub. This strong connection allows the transmission of high torques. In sprocket installation, tapered lock bushings ensure proper sprocket installation and easy alignment.
Dimensions of the 1310 Taper Lock Bushings
- Bushing Number: 1310
- Bore: 1″、1/2″、10mm、11/16″、11mm、12mm、13/16″、14mm…..
- Dimension (A): 1-7/8″
- Dimension (B): 1-1/2″
- Dimension (D): 1-3/4″
- Number Of Set Screws: 2
- Threads: 3/8″
- Length: 5/8″
- Wrench Torque: 175 LBS
- Weight: 0.6 LBS
Installation
1. Clean all oil, dirt, and paint from the shaft, bushing holes, bushing exterior, and bores of components (sprockets, pulleys, etc.).
2. Insert the bushing into the assembly. Match hole patterns, not threaded holes (each hole is threaded on one side only).
3. Thread the set screw or cap screw into the half-threaded hole shown below. Install the assembly on the shaft.
4. Alternately set the torque setting or cap screw* to the recommended torque setting in the table below.
5. Fill all unoccupied holes with grease.
Removal
1. Remove any retaining or cap screws.
2. Insert the set screw or cap screw into the above hole.
3. To reinstall, complete all five (5) installation instructions.
Features of Taper Locking Bushings
There are several reasons for choosing a tapered locking bushing, but perhaps none is more important than preventing leaks. This unique feature variety of applications, including pulleys and pulleys. If you’re wondering if you should buy this type of bushing for your specific application, keep reading. We will explain them one by one.
Another important feature of tapered locking bushings is their precision tolerances. Commonly used in power transmission applications, including power transmission and distribution. And because they’re made with cap screws, they’re safer than traditional bushings. Here are some other benefits of tapered locking bushings:
The split cone bushing contains a split barrel. Because they’re split, they don’t need to fit a hole perfectly, and they’re versatile enough to accommodate changing shaft sizes. They are also very easy to install, making them an excellent choice for applications that require precision. While these types of bushings are expensive, the extra safety they provide is worth it. They are more durable than traditional bushings and keep your transmission and other components from slipping.
Click and check out more products you’re looking for.
Q1. Are you a factory?
A. Yes. We are a factory with more than 30 years of manufacturing experience.
Q2. Is OEM and ODM service available?
A. Of course. We have many years of experience in OEM& ODM service.
Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you， email us.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.