Wheel Drive Planetary Speed Reducer Replacement of bonfiglioli 600L series
600L series Wheel Drive Planetary Speed Reducer Gearbox replacement of bonfiglioli
600L series Wheel Drive Details
 |
 |
 |
The installation dimensions of planetary gearbox, wheel drive gearbox, winch drive gearbox, and track drive gearbox produced by us are exactly the same as those of transmittal Bonfiglioli, and the performance parameters are very close to those of transmittal Bonfiglioli, which can be used instead of transmittal Bonfiglioli’s products.
Superior Performance
The 600L Series wheel drive planetary gearbox is designed for self-propelled vehicles with hydraulic or electric motors. Available in a wide range of ratios, the gearbox allows the power system to operate at optimum efficiency. The 600L planetary gear reducer for the wheeled vehicle has the capacity to drive whatever the type of machine with up to 2.5m of tire diameter and 50 tons each wheel. Thanks to the wide ratio range, there is a solution for any type of transmission and application. The manual declutch system can disengage the gearhead from the motor for emergency towing.
Key Features
1. Output torque range: 1000-60000 N.m
2. Gear ratios: i=5.3-142
3. Support: the gearbox has rotating housing flanges to fit the wheel
4. Applicable motors: axial piston hydraulic motors, hydraulic orbit motors, or others
5. Hydraulic motor options: pressure relief valve, over-center valve
6. Bearing: robust bearing system absorbing the forces exerted by the ring gear
7. Brake: hydraulically released parking brake
8. Others: 600L Series wheel drives with manual disconnect application
9. Large radial and axial load capacity due to the use of strongly tapered roller bearings.
10. Reliable oil seal protection, designed according to our field experience.
11. Universal and SAE input direct mounting flanges
12. The units are designed for their direct mounting into the wheel rims.
13. Technical data and installation dimension of 600L Series gearbox are the same as those of Rexroth GFT…W Series and Bonfiglioli 600 Series, so these three can be used interchangeably.
600L series Wheel Drive Details
|
Track drives type
|
Max torque N.m
|
Range of ratio(i)
|
Max input speed(rpm)
|
Braking torque(N.m)
|
|
Power 601L1A
|
1750
|
5.77
|
1000
|
450-600
|
|
Power 603L2A
|
4000
|
19-23-32-40
|
3000
|
210
|
|
Power 603L2B
|
4000
|
19-23-32-40
|
210
|
|
|
Power 602L2
|
5000
|
12.4-25.8
|
–
|
|
|
Power 605L2
|
7000
|
22-27-30-42-53
|
220-310
|
|
|
Power 606L2, L3
|
12000
|
30-35-43-68-79
|
300-800
|
|
|
Power 607L2, L3
|
17000
|
33-75-108
|
300-600
|
|
|
Power 609L2, L3
|
23000
|
33-142
|
300-800
|
|
|
Power 610L2, L3
|
30000
|
20-111
|
300-800
|
|
|
Power 611L2, L3
|
36000
|
41-47
|
300-800
|
|
|
Power 613L3
|
45000
|
108
|
300-800
|
|
|
Power 615L3
|
60000
|
108
|
300-1000
|
Application of Wheel Drive Planetary Reducer
Construction (dryers, crushing machines, mixing mills, cranes, mobile scaffolds)
Material handling (gantry cranes, mobile dock cranes, movable stocks, bridge cranes)
Waste and sewage treatment (rotating filters, thickeners, clarifiers, Warm hoists, agitators)
Mine and quarry machines (drilling and excavation, machine, selectors, classifiers, conveyors, crushing machines)
Wind energy (pitch drives, yaw drives)
Substructures (movable roofs, movable gantries, piling)
Steel processing machines (conveyors, extruders, cutting machines, roll benders, rolling mills)
Food industry (mixing machines, mixers, conveyors, fruit extractor machines)
Company Information
We’re a Symbol of quality craftsmanship in China. Founded in 1992, specializing in the manufacturing of slewing drives, wheel drivck drives winch drives of gearboxes are used in a variety of applications including construction machine petroleum, coal, geological exploration, shipping, metallurgy, solar power, wind power, agriculture, and protection. After years of developmental success, our products are international recognized for their quality. We export gearboxes to many places in the world, including Southeast Asia, Middle East Germany, USA Canada Spain Australia, Turkey, and India. We are a consistently growing enterprise that seeks to satisfy our customer’s location
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.