6050 Taper Lock Bushings
6050 Taper Lock Bushings
What are taper lock bushings(6050) and how do they work? In this article, we’ll discuss what these bushings are and why they’re important to your equipment. A tapered locking bushing is a type of bushing that holds bolts to the hub. They are used in many industrial applications, including pulley and hub mounting. While these bushings are standardized, their actual bolt holes may vary from the chart.
Taper-Lock bushings are used for the mechanical connection of shafts, gears and pinions. Their tapered surfaces provide flexibility between the main component and shaft, while keyways and threads provide rigidity. Taper-Lock bushings are machined to meet ISO standards. Mounted on tapered hubs, these bushings are capable of withstanding the forces of high cantilever loads. To take full advantage of this feature, you must order the appropriate Taper-Lock bushing, which must fit the hub.
Unlike flanged bushings, tapered locking bushings do not require flanges for installation. They use a blind hex socket head cap screw to drive the bushing into the hole of the assembly and compress the inner diameter of the bushing. This design also makes them easier to install and remove, saving machining time and money. Also, if you are working with a complex machine, you can purchase pre-assembled tapered lock sleeves for a variety of applications.
Taper Lock Bushing Size Chart
The dimension table below shows the standard dimensions of the taper lock bushing, please note that the following figure is the basic dimension required, the actual installation and removal of the bolt holes may vary.
As one of the advantages of tapered lock bushings, it is also a very popular choice among wheel nuts. Unlike standard wheel nuts, tapered lock bushings have longer threads that fit into the grooves. Unlike traditional wheel nuts, which require a lot of thread cutting, tapered lock bushings are closer to the axle. The length of the thread is greater than the actual diameter of the bushing, making it more precise.
Another advantage of tapered locking bushings is that they save inventory. Tapered lock bushings are easier to replace than standard bushings because the hub has tapered bores and requires less expensive finishing. These advantages are outweighed by a number of obvious disadvantages. Nonetheless, these advantages are offset by cost savings associated with lower inventory and assembly times.
Another benefit of tapered lock bushing pulleys is that it enables unskilled workers to obtain a shrink-fit on the pulley coupling and shaft. In addition to being an excellent choice for traction applications, tapered lock bushing pulleys are also valuable in solvent plants for improving the quality and efficiency of plant processes. It also increases the durability of the machine.
Click and check out more products you’re looking for.
Q1. Are you a factory?
A. Yes. We are a factory with more than 30 years of manufacturing experience.
Q2. Is OEM and ODM service available?
A. Of course. We have many years of experience in OEM& ODM service.
Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you， email us.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.