Construction Hoist Rack Elevator Rack
40x60x1508mm
M8
C60 steel
Construction Hoist Elevator Rack
Construction Hoist Elevator Rack
Material: C60 steel (super high strength and excellent wear resistance)
mold – M8
Dimension of Construction Hoist Rack
Rack and pinion for construction
The function of rack and pinion systems varies greatly depending on where they are installed. They are pusher or lift mechanisms for jacks, clamping systems, and workpieces. A typical example of a rack and pinion application is a hand press. In this application, the pinion rolls on a fixed rack. A similar mechanism is used in extrusion systems.
The rack and pinion system can be made from a variety of materials. They are available in various sizes, including round and rectangular models. These systems also benefit from variable frequency drive systems that maintain motor torque throughout the operating range.
Another everyday use for rack and pinion systems is in steering gear mechanisms, vehicle steering systems, and machine tools. They are also commonly used in printing presses and construction vehicles. Mounting holes are typically used to attach the rack to the machine. Also, use tape or countersink. The helix angle of the helical rack is 19 degrees 31’42”. This helix angle is considered user-friendly.
As rack and pinion suppliers, we always aim to provide the highest quality products and the most comprehensive services and look forward to cooperating with you.
Hot Tags: plastic bevel gear, manufacturers, rack and pinion jack, factories, suppliers, customized, wholesale, Chinese suppliers
The benefits of elevator rack
An elevator rack is a device that allows an elevator car to raise and lower the mast at a controlled speed. They are ideal for a variety of applications. For example, you can install a rack and pinion lift in an oil rig to allow the rig to work at smaller depths. You can also mount them on semi-submersible platforms. These devices are easy to install and offer several advantages.
The applications for a rack and pinion elevators are almost endless, build scaffolding, transportation platforms, etc. There are also models with enclosed cars and mast climbing platforms.
A rack and pinion elevator is an elevator that uses a rack and pinion system to move goods from one floor to another. Frame lift sizes vary by application. Some are large enough to transport people and cargo, while others are smaller and designed for specific tasks. These elevators are more convenient and safer than their predecessors and are also easy to install.
They are easy to install and maintain, with low installation and mechanical operating costs. The rack and pinion system also enables safe evacuation in an emergency.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.