Customized Double Helical Gear
Customized double-helical gear
Material: steel, customized
Customized Double Helical Gear Description
Customized double-helical gear
Material: steel, customized
Product Specification
| Material | Cast Iron, Carbon Steel, Alloy Steel, Bronze, etc |
| Pressure Angle | 14.5-20 degrees |
| Gear Center | Center bore |
| Tooth Form | Straight Teeth or Spiral Teeth |
| Outer Diameter | 100-5000 mm |
Product Description
Product DescriptionDouble helical gears overcome the problem of axial thrust presented by single helical gears by using a double set of teeth slanted in opposite directions. A double helical gear can be considered as two mirrored helical gears mounted closely on a standard axle. This arrangement cancels out the net axial thrust since each half of the gear thrusts in the opposite direction, resulting in a net axial force of zero. This arrangement can also remove the need for thrust bearings. However, double helical gears are more difficult to manufacture due to their more complicated shape.
The Salient Features Of These Double Helical Gears Are As Follows:
- Smooth Operation
- High Strength In Contact Of The Teeth
- Elimination Of Side Ways Force
- Fully Balanced Thrust Load
- Lower Load On Gear Reducer Housing
- Large Face Overlap Due To Absence Of Axial Thrust
- Excellent And Smooth Transfer Of Torque & Motion at High Rotational Velocities.
As one of the leading double-helical gear manufacturers and suppliers in China, we welcome you to buy bulk double-helical gear for sale here from our factory. All customized products are of high quality and low price. Through a long-term development, our double-helical gears have been best-selling domestically and abroad and obtained numerous merchant approvals and faith.
Please tell us so that we will regard your inquiry priority.
FAQ
1. Q: Is it right to make the customer’s brand name?
A: Yes, we have OEM service.
2. Q: Are you a manufacturer or trading company?
A: We are a manufacturer. It is in Zhejiang City; we also have an office in Singapore.
3. Q: Can you do the design for us?
A: Yes, we can; we have our R& D department
4. Q: How can I get a sample to check your quality?
A: Yes, we could offer the sample for free, but could you buy a ticket for it?
5. Q: How long can I expect to get the sample?
A: About 3-5 days if you have stock.
Packaging
Generally, We will choose the most suitable packing method for products. If you have any special requirements for packing, please get in touch with us in advance;
& Shipping:
For small orders, we can send you by UPS, DHL, FEDEX, or TNTOR EMS. The tracking number will be advised after delivery.
If an order is significant, we advise you to use Air Freight or Sea Freight.
Hot Tags: customized double helical gear, manufacturers, factories, suppliers, customized, wholesale, material customization, Chinese suppliers
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.