Flat Top Chains SS512/515 Single Hinge Pitch 25.4 mm
Flat Top Chains SS512/515
SS512/515 Single Hinge Pitch 25.4 mm Straight running Flat Top Chains For beer industry bottle conveyor
Product Description
Steel and Stainless Steel Flat Top Chains(Single Hinge Pitch Flat Top Chains) are produced in straight running and side flexing versions and the range are covered by a broad selection of raw materials and chain link profiles to provide solutions for all conveying applications. These Flat Top Chains are characterized by high working loads, highly-resistant to wear and extremely flat and smooth conveying surfaces. The chains can be used in many applications and are not just confined to the Beverage Industry.
|
Suggestion: lubricant The longest distance: 15M Max. speed: lubricant 90M/min, dryness 60M/min Working load: 2600N Material: austenitic stainless steel (non-magnetic) ferritic stainless steel (magnetic) Packing: 10 feet = 3.048 M/box 39pcs/M |
Widely used in all kinds of conveyor to bottle and heavy load such as metal. Especially applied to the beer industry.
|
Chain No.
|
Width (W)
|
Weight
|
Plate Gap (PG)
|
||
|
mm
|
inch
|
kg/m
|
lbs/ft
|
mm
|
|
|
SS512/515 – K217
|
55
|
2.17
|
2.1
|
1.42
|
1.6
|
|
SS512/515 – K250
|
63.5
|
2.50
|
2.3
|
1.55
|
1.6
|
|
SS512/515 – K283
|
72
|
2.83
|
2.4
|
1.62
|
1.6
|
|
SS512/515 – K325
|
82.6
|
3.25
|
2.5
|
1.68
|
1.6
|
|
SS512/515 – K350
|
88.9
|
3.50
|
2.6
|
1.75
|
1.6
|
|
SS512/515 – K385
|
98
|
3.85
|
2.7
|
1.81
|
1.6
|
|
SS512/515 – K400
|
101.6
|
4.00
|
3.2
|
2.15
|
1.6
|
Contact us: We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to the high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Please allow 24 business hours for us to response.
Related Products
 |
 |
 |
 |
 |
 |
 |
| SS881 | SS881TAB | SS8157 | SS8857M | SS512515 | SS802805 | SS812813mini |
 |
|
|
|
|
|
 |
| SS812 | SS881G | SS881M | SS802805G | SS812815G | TPW | 1864 |
|
|
|
|
|
|
|
|
| 1874TAB | 1874TAB-G | LF520 | LF810 | Lf810TAB | LF820 | LF820E |
|
|
|
|
|
|
|
|
| LF820mini | LF820mini | SS881TAB-G | LF880TAB | LF880TAB-E | LF820 | LF820 |
|
|
|
|
|
|
|
|
| LF820mini | LF821 | LF831 | LF880 | LF882TAB | LBP821 | LBP831 |
|
|
|
|
|
|
|
|
| LBP8257 | LF878TAB | LF880BS | LF880M | LF882 | 1873GJ3A | 820G |
|
|
|
|
|
|
|
|
| 821G | 880TAB | 882TAB-G | 1873GD | LBP882M | LBP882TAB | 1873 |
|
|
|
|
|
|
|
|
| 1873D1 | 1873D2 | 1873D3 | 1873G4 | 1873G4M | 1873GJ3B | 1873GJ4 |
- Large bell-type intelligent annealing furnace: stable and reliable annealing quality and low energy consumption
- Mesh belt furnace: first-class domestic mesh belt furnace heat treatment production line
- Multipurpose furnace: Epson multipurpose furnace provides stable and reliable heat treatment quality
- ABB intelligent welding robot: instead of manual completion of complex welding operations, the welding is beautiful, stable, and reliable
- Automatic hot riveter: the self-developed automatic assembly line of welding chain can replace manual to realize automatic outcrop and hot riveting, with stable products, high precision, and high efficiency
- Induction quenching equipment: the self-developed semi-automatic induction quenching equipment successfully realizes selective (local) induction quenching of pin shaft and induction quenching of sprocket teeth
- Programmable gantry cutting machine: it has the functions of plasma cutting and flame cutting
- CNC machining center: CNC vertical machining center and CNC horizontal machining center, which meet the processing of high-precision molds and products
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.