G70 NACM90 Tow Chain
The G70 NACM90 traction chain is an auxiliary safety device for securing the vehicle to the towing vehicle. After securing the car to the hydraulic trolley, the tow truck operator attaches the energy chain to the car frame. Operators can also use axle straps to ensure the vehicle remains safe.
The chain’s material: heat-treated carbon steel. Its high strength-to-weight ratio makes it an excellent choice for logging, pulling, and load-binding applications. It complies with Department of Transportation regulations and is available in sizes from 1/4″ to 1/2″. It is also rust and corrosion-resistant.
The G70 NACM90 energy chain is made of high-quality high-carbon steel. The chain is designed to withstand various loads, including heavy truck loads. Its strength-to-weight ratio is excellent, with a maximum working load of 4700 lbs.
The G70 NACM90 energy chain is according to Australian and American standards. It is available in galvanized, galvanized, or bright galvanized finish. The chain is proven tested and suitable for overhead lifting. These chains are also with heat-treat to prevent rust.
Link chain application
A chain link is a flexible mechanism used in a variety of applications. Its flexibility comes from its ability to adjust the length. There are two main types of link chains. Strip tension members and short links. The bar-shaped tension members act as stabilizers for the chain links. Short chains can be configured in a variety of ways and can be arranged in a telescopic configuration.
One link chain application is in push boats. In this case, the link is used as a connecting device, allowing the connected boat to bend in the river. Each side of each link has a tensioning device to control the curvature. The tensioning device can also be adjusted along the length of the chain link.
Another type of chain link is the safety chain, which is used in traction applications. There are several links, including bead chains and ball chains. Studs provide extra strength and prevent kinking. These chains are usually made of steel alloys or plain carbon steel. Depending on the type of load and application, the type of chain used in the lifting process may vary.
When lubricating multi-strand chains, core-fill distribution tubes can be used to distribute the oil evenly to each chain plate and sidebar. Another option is to run a short length of chain through the oil bath at the bottom of the chain housing. The oil level should not exceed the chain link line at the lowest operating point. Any longer section increases the risk of oil foaming and overheating.
| One-stop Supplier of Chain Transmission Products | |||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Related sprockets
Properly installed sprockets can increase the efficiency of a chain-driven motion system. They can also carry heavy loads, making them essential to many chain-driven motion systems. Proper selection of sprockets is essential to ensure proper operation and prevent damage to the machine. When selecting a sprocket, consider your system’s size and type of fit.
Sprocket life varies widely, depending on several factors, including riding style and conditions, chain pitch and size, and maintenance regime. Typically, a brand new steel sprocket’s lifespan is less than 5,000 km. For longer life, consider using a sprocket with “hardened teeth.” Hardened teeth can triple the life of the sprocket.
Reviews
There are no reviews yet.