Greenhouse Gearbox Gear Reducer for Sunshade Roller Shutter
The greenhouse reduction motor is one of the critical applications in the greenhouse. Qualified reduction motors not only need to ensure torque strength and low operating noise, but also need high-quality limit switch devices. The quality of limit switch device directly affects the stability of reducer operation and the accuracy of system positioning, such as curtain pulling and window opening, so as to ensure the control operation of reducer. The accuracy and safety factor of the location, its performance and stability will directly affect the use of the greenhouse.
Sunshade Roller Shutter Greenhouse Gearbox
The greenhouse gearbox(Sunshade Roller Shutter Greenhouse Gearbox) body is solid and reasonable in structure, reliable in performance, and simple in operation and maintenance. The limiting device used has the best-forced wiring method. When the motor runs in this direction, the control circuit passes through three microswitches, each of which has three functions: braking, emergency braking, and phase staggering protection.
The greenhouse reduction motor is one of the critical applications in the greenhouse. Qualified reduction motors not only need to ensure torque strength and low operating noise, but also need high-quality limit switch devices. The quality of limit switch device directly affects the stability of reducer operation and the accuracy of system positioning, such as curtain pulling and window opening, so as to ensure the control operation of reducer. The accuracy and safety factor of the location, its performance and stability will directly affect the use of the greenhouse.
Working principle of greenhouse reducer
It is widely working in single-layer and multi-layer greenhouses to provide power for internal and external sunshades, top windows and side windows.
The special gear reducer motor for greenhouse plays a key role in the construction of greenhouse, because the greenhouse curtain pulling motor drives the internal and external sunshade or thermal insulation curtain and window opening system in the whole greenhouse. The reducer motor is an important link in the construction of smart agricultural greenhouse, driving the operation of the entire intelligent system.
The working principle of the decelerator motor is that the decelerator drives the drive shaft to rotate, the drive shaft drives the A-gear to rotate, and the gear rotation makes the gear rack reciprocate. Because the rack and the push rod are working together, the push rod and the rack move at the same time. The drive side profile and the push rod are connectting through the push rod connection card. One end of the sunshade curtain is fixed on the drive side profile, so the sunshade curtain moves with the drive side profile to achieve the deployment of the sunshade curtain Collapse action. So once damaged, the consequences are unimaginable.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.