NACM90 G30 5/16” Galvanized Safety Chain with S hook on One End
- Material: Low Carbon Steel
- Surface Treatment: Mainly Electro-Galvanized, Hot-dip Galvanized
- Tension Grade: G30
- Proof Coil Chain
NACM90 G30 5/16” Galvanized Safety Chain with S hook on One End
This general-purpose chain(NACM90 Galvanized Safety Chain) can withstand the wear of typical applications. Its corrosion resistance is excellent. The only alternative is stainless steel. The chain is manufactured to ANSI/ASAE Standard S338.5. It carries a permanent identification sticker stating its intended gross vehicle weight.
Our company also provides many conveyor chain types. If you need to know more product types and information, such as conveyor chain, you can contact us by email or communicate with our online staff. Looking forward to working with you.
Advantages of Galvanized Safety Chain
Galvanized safety chains can prevent the trailer from uncoupling from the tractor. The chain consists of two S-shaped hooks with safety latches on both ends. It measures a quarter inch x 42 inches and is made of galvanized steel. It should last at least two years, but if you’re using it in harsh conditions, it’s recommended to replace it as soon as possible.
Heavy-duty galvanized safety chains are used in applications that require a lot of strength. Its strength is about five thousand pounds per foot. Galvanized steel chain sold by the foot. Its design makes it ideal for general safety and towing vehicle applications. Its galvanized finish means it is more resistant to corrosion and rust.
Safety chains are available in different colors. One option is yellow, black or red. These are reflective. While they are less expensive than galvanized steel, they are not as strong or resistant to corrosive environments. Regardless of the material, safety chains should be purchased with caution.
Safety chains are an essential part of a trailer. They connect the trailer to the tongue of the trailer, ensuring a proper connection. They also allow the trailer to navigate in case of a trailer coupler failure. The safety chain should be attached to a chain retainer with two chains to ensure they are securely held in place. Improperly installed safety chains can result in loss of control or injury.
Drive Chain
Drive chains are used in vehicles to power various mechanical devices. These chains are made of metal or steel and are designed for a specific purpose. These chains are commonly used in cars, motorcycles, and bicycles. They can also be used in industrial applications. They are commonly used in printing presses, wire and tube drawing machines, and conveyors.
A drive chain uses a series of teeth to transmit motion from one part of the drivetrain to another. This results in less frictional losses than other belt-dependent systems. Also, chains are generally stronger than belts. And because of their increased mass, they tend to have higher inertia than belts.
Drive chains are also used in machine shops and handling equipment. Regardless of speed, these chains are an efficient means of transmitting electricity. They connect the electric motor to mechanical parts such as sprockets. They can be made of different materials, from steel to various other materials.
The drive chain consists of several mounting elements, including tensioners, rails, fixing plates, and other components. They are used in many automotive applications and can be found on conveyors, forklifts, bucket elevators, and oil drilling equipment.
| One-stop Supplier of Chain Transmission Products | |||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.