SS 1615 Stainless Steel Taper Lock Bushing
SS 1615 Stainless Steel Taper Lock Bushing
If you’re looking for a quick and easy way to install a pulley on a shaft, you might be wondering what stainless steel tapered locking bushing is. Basically, these tapered locking bushings are split flangeless bushings that are screwed onto the shaft using screws. The tapered locking design provides excellent holding force and is widely used in the aerospace and automotive industries.
We sell a wide range of taper lock hubs designed for industrial use. These hubs feature stainless steel construction and detailed locking sections. Whether you need a large project or are looking for individual parts, we can help you find the right stainless steel tapered lock sleeve. All of their bushings are precisely sized so they are locked and strong even in high-temperature environments.
Dimensions of SS 1615 stainless steel taper lock bushing
- Bushing Size: SS-1615
- Bore Size: 1″、1-1/16″、1-1/8″、1-3/16″、1-1/4″、1-5/16″、1-9/16″、1-3/8″、1/2″、9/16″、1-5/8″、11/16″、13/16‘、3/4″、7/8″、15/16″、10mm、11mm、12mm、14mm、16mm、18mm、19mm、20mm、22mm、24mm、25mm、28mm、30mm、32mm、35mm、38mm、40mm、42mm
- Dimension (A): 2-1/4″
- Dimension (B): 1-1/2″
- Dimension (D): 2-1/8″
- Bushing Weight: 1 LBS.
If you need industrial gearbox components, stainless steel tapered locking bushings are a good choice. Made of stainless steel, they are strong, durable, and corrosion-resistant. If you are looking for an affordable solution for this industrial requirement, then Power-trans is the way to go. These tapered locking hubs are available in a variety of sizes and custom is acceptable to your requirements. These bushings are precisely sized and lock tightly even in extreme temperatures.
In addition to high strength and durability, tapered lock bushings are easy to replace and are available in a variety of bore sizes. Typically, they are used to slip into hub welds and machine directly into pulleys and sprockets. Bushings are available in a variety of bore sizes and shapes and can be cast or stainless steel. They are gaining popularity as a high-impact alternative.
Stainless steel tapered locking bushings are pre-drilled and keyed to the shaft and keyway, which helps reduce the length of the through-hole. Using internal screws to secure the bearing, this type of bushing has the best fit. You can also choose the right hub to mount it on, as bushing installation is critical to long-term performance.
Keyless Bushings
Another benefit of keyless bushings is their ability to reduce installation stress on components. They eliminate the need for threaded holes or keyways that can cause fretting or play. Additionally, they make installation easier, faster and more accurate. Keyless locking bushings are more accurate.They can transmit the same torque as keyed bushings.
Click and check out more products you’re looking for.
Q1. Are you a factory?
A. Yes. We are a factory with more than 30 years of manufacturing experience.
Q2. Is OEM and ODM service available?
A. Of course. We have many years of experience in OEM& ODM service.
Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you，email us.
Packing Shipping Delivery
  |
 |
|
 |
 |
|
How to choose power transmissions parts and industrial products which meet our requirement
| Chains | Sprockets | Pulleys | Timing belt Pulley | V-belt Pulley |
| Sheaves | Coupings | Bush &Hub | Gear& Rack | V-Belt |
| Locking Assembly | Pulley | Gearbox | Reducer | Shaft Collar |
| Rod End Bearing | Clevis | PTO | Chain Guide | Belt Guide |
| Rubber Buffer | Chain Tensioner | PTO Drive Shafts | Universal Joints | Roller Chains |
| Conveyor Chains | V-Belts | Worm Gearbox | Helical Gear | Worm |
| Agricultural Chain | CNC Proces Parts | Casting | Stamping | |
| Powder Metallurgy | CNC Proces Parts | Casting | Stamping |
What Products Do you sell ?
We are a group of factories, give customer one stop solution of power transmission and industrial products. We are in the position to supply wide range of products, including chains, sprockets, v-belt and v-belt pulleys, timing belt and timing belt pulleys, gears, speed reducers, motors, racks, couplings, and many other parts, like locking assembly, taper bushing, Chain guide, shaft collar, torque limiter, cam clutch, universal joint, motor base and motor slide, rod end, clevis, rubber mount, etc. We make special parts according to drawings and/or samples.
How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,
escalator,automatic storage equipment, metallurgy, tabacco, environmental protection, logistics and etc.
What is the producing process?
Production process including raw material cutting, machine processing, grinding, accessories cleaning, assemble, cleaning, stoving, oil coating, cover pressing, testing, package.
How to control the products quality?
Combining advanced equipment and strict management, we provide high standard and quality bearings for our customers all over the world.
What is the transportation?
-If small quantity , we Suggest to send by express, such as DHL,UPS, TNT FEDEX. If large amount, by air or sea shipping.
Can we design packaging?
-Yes. Default is regular packing, and we can make customer's own packing.
Can you provide OEM service?
-Yes, we work on OEM orders. Which means size, quantity, design, packing solution, etc will depend on your requests; and your logo will be customized on our products.
Can you give me discount on Power Transmissions Parts and Industrial parts?
-Yes, of course. Pls. send me your Email, you'll get more
Q: Are You a trading company or a manufacturer?
A: We Are the factory and have our Own trading company
Q: How Can I get an offer?
A: please send US quotation information: drawings, materials, weight, quantity and requirements, we can accept PDF, ISGS, DWG, STEP file format. If you don't have the drawings, please send us the samples, we can also quote you according to your samples.
Q: What is your minimum order size?
A: it is usually 100 pieces, but a low quantity is acceptable under some special circumstances.
Q: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't pay the freight.
Q: What is the lead time for mass production?
A: honestly, it depends on the number of orders. Normally, if you don't need the tools, deposit them after 30 days or so.
Q: What if the parts don't Work?
A: we can guarantee the quality, but if it happens, please contact us immediately, take some photos, we will check the problem and solve it as soon as possible.
Q: What are your terms of payment?
A: payment is less than US $1000,100% in advance. Payment: $1000,50% wire transfer in advance, balance before shipment,Other Terms of payment are negotiable
Reviews
There are no reviews yet.