WPKZ Series Worm Gearboxes
The basic structure of a worm gear reducer(WPKZ Series Worm Gearboxes) is mainly composed of transmission parts, worm gear, shaft, bearing, box, and accessories. It can be divided into three essential structural parts: box, worm gear, and worm, bearing, and shaft combination. The box is the base of all the accessories in the worm gear reducer. It is an essential accessory to support and fix the shafting parts, ensure the correct relative position of the transmission accessories, and support the load acting on the reducer. The worm gear is mainly working with transfer motion and power between two staggered shafts, and bearings and shafts are used primarily to share control and operation and improve efficiency.
Product Specifications
WPKZ Series Worm Gearbox Features:
- Drive smoothly. Vibration. Impact and noise are negligible. The deceleration ratio is large. Versatility is wide. And working in a variety of mechanical equipment.
- Large transmission ratio can be obtained by single-stage transmission. And the structure is compact. Most types of reducers have better self-locking performance. Braking devices can be saved for mechanical equipment with braking requirements.
- The meshing friction loss between the worm tooth and worm gear tooth surface is more significant. So, the transmission efficiency is lower than that of the gear. Accessible to heat and high temperature.
- Higher requirements for lubrication and cooling.
- Good compatibility. Produce the worm gear and worms according to national standards. Bearing. Oil seal and other standard parts are used.
Precautions for Use
(1) Before use, attention: whether the reducer type structure, center distance specifications, transmission ratio, input shaft connection mode, output shaft structure, input shaft output shaft pointing, and rotation direction meets the requirements.
(2) Fill in the suitable type and grade of a lubricating oil according to the requirements specified in “Selection of Lubricating Oil Use” on the sample. After refueling, tighten the aerator of the item part and pull out the small cone plug on the aerator before the reducer can start to operate. Must choose the appropriate brand of embellishment
(3) Oil must control the appropriate amount of refueling according to the requirements of a timely oil change, especially paying attention to the first use of 100 hours after replacing new oil.
(4) If any abnormal situation occurs during the use, it will stop for inspection in time and handle referring to the table of “Fault Causes and Solutions.” (The maximum oil temperature of the reducer is reach 95℃. Under this temperature limit, as long as the oil temperature does not rise, it is safely).
WPKZ Series Worm Gearboxes Packing and Transportation
- Packaging: To ensure the integrity of product appearance, we will choose cartons, wooden pallets, and wooden pallets according to customer needs.
- Delivery time: Produce and test the products with strict and fixed procedures to ensure that the quality is correct before leaving the factory and delivery on time.
- Transportation mode: We will choose the most suitable mode of transportation for our customers according to the weight and size of the goods. We can also choose the mode of transportation according to the needs of our customers.
- Receiving and after-sales service: After receiving the goods, please check whether they are in good condition. We will provide customers with perfect after-sales service.
Company Profile
We handle power transmission products; our lines mainly cover series products in speed reducers, gearboxes, associated electrical motors, and other power transmission accessories. Based on their versatile functions, our products are working in many fields: wastewater treatment machines, dredgers, the chemical industry, cranes, metalworking mills, conveyors, the paper industry, the cement industry, cableways, and so on. With excellent quality and reasonable prices, our products enjoy a good reputation from customers and peers worldwide.
Furthermore, the R&D investment is increasing annually to meet our customers’ new demands better and adapt to the recent tendency of the industry. Depending on the principles of honestly operating and mutual benefit, We sincerely look forward to cooperating with you.
FAQ
Q1: Are you a trading company or a manufacturer?
A: We are a manufacturer in China. Our company owns the ability to manufacture, process, design, and R&D. We welcome your visit.
Q2: How do we select models and specifications?
A: According to the specific details of the demands from the part of the inquiry, we will recommend the products’ models upon synthesizing the factors of the field of product usage, power, torque arm, and ratio…
Q3: How is your price? Can you offer any discount?
A: Our prices are always competitive. If the customer can place a large order, we indeed will allow a discount.
Q4: How long should I wait for the feedback after I send the inquiry?
A4: We will reply as soon as possible, 12 hours at most.
Q5: What is your product warranty period?
A: We have the certifications of ISO9001, CE, and SGS.
Q6: What industries are your gearboxes working in?
A: Our gearboxes are widely working in metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment, and so on.
Reviews
There are no reviews yet.